Industrial installation with TMI composite piping

GRP solutions for seawater desalination

TMI works on desalination plants with composite solutions for seawater intake, filtration, brine networks and chemical-cleaning circuits.

GRP composite piping for seawater intake
Seawater · Filtration · Brine
Industry sector

Piping networks exposed to saline environments and demanding fluids

A desalination plant combines several circuits with different functions: raw seawater intake, filtration, brine circulation and chemical-cleaning operations.

TMI addresses four key applications in this sector: seawater intake piping, les sand filters, les cartridge filters et la piping for brine and chemical cleaning.

Composite solutions must be defined from actual project characteristics: dimensions, interfaces, service conditions, layout and connections with other plant equipment.

Seawater intake Sand filters Cartridge filters Brine Chemical cleaning
Applications TMI

From seawater intake to plant-cleaning circuits

Each stage requires equipment sized consistently with flow rates, connections and the actual plant environment.

01

Seawater intake

Piping used to transfer seawater from the intake point to the treatment equipment provided by the plant.

02

Sand filters

Filtration equipment used to prepare seawater before subsequent process stages.

03

Cartridge filters

Additional filtration equipment integrated into the treatment train according to the plant design.

04

Brine & chemical cleaning

Networks for brine transport and circuits used during chemical-cleaning operations.

Seawater intake

Engineer the network from the plant inlet

Intake piping is one of the first elements of a desalination system and must integrate with downstream structures and equipment.

TMI designs and manufactures piping networks for seawater intake and transfer. Network definition considers dimensions, direction changes, flanges, supports and interfaces with pumping and filtration equipment.

GRP/FRP fits TMI’s core expertise in designing and manufacturing composite piping networks for corrosive or aggressive fluids.

Voir les tubes & accessoires PRV →
GRP seawater intake network
Intake & transfer A network to be engineered consistently with access, supports and downstream equipment.
Filtration

Equipment integrated into seawater preparation

TMI designs and manufactures filtration solutions including sand filters and cartridge filters for seawater desalination plants.

01

Sand filters

Filtration equipment used to prepare the water before subsequent process stages.

02

Cartridge filters

Additional filtration equipment integrated according to plant configuration and technical requirements.

03

Connection piping

Piping and fittings connecting filtration equipment to each other and to other plant circuits.

04

Interfaces & maintenance

Connections, access and disassembly requirements to be considered during engineering to facilitate operation and future maintenance.

Filtration equipment in a water-treatment installation
Engineering, fabrication & site

Maintain technical continuity between the different circuits

A desalination plant combines several networks with different functions. Their integration must be anticipated before fabrication starts.

Measurements & layoutIdentify dimensions, levels, interfaces and site constraints before fabrication.
GRP fabricationPrepare piping, fittings and equipment according to approved technical data.
RaccordementMaintain consistency between intake, filtration and other plant circuits.
On-site worksAdapt installation and connections to actual site conditions.
Brine & chemical cleaning

Specific networks to integrate with the rest of the installation

Brine and chemical-cleaning circuits serve different functions but require the same level of preparation as intake or filtration.

TMI designs and manufactures piping networks for brine transport and chemical-cleaning circuits in seawater desalination plants. Materials, connections and interfaces are defined according to fluid characteristics, operating conditions and project-specific constraints.

Engineering must also anticipate access required for operation, servicing and potential maintenance on these networks.

View engineering & design →
GRP network with valves for brine and chemical cleaning
Specific circuits Brine and chemical cleaning require clearly identified networks correctly integrated into the installation.
Frequently asked questions

Seawater desalination: TMI applications

Drawings, flow rates, dimensions and characteristics of the different circuits help prepare equipment more precisely.

What solutions does TMI provide for seawater desalination?

TMI develops GRP/FRP composite solutions for seawater desalination plants, including seawater intake, sand and cartridge filtration, brine networks and chemical-cleaning circuits.

These systems are engineered according to project characteristics, operating conditions and installation-specific constraints.

Does TMI manufacture seawater intake piping?

Yes. Seawater intake piping is one of TMI applications for desalination installations.

What filtration equipment is involved?

TMI designs and manufactures filtration solutions including sand filters and cartridge filters, together with the piping networks and connections required for their integration into the installation.

Can you manufacture brine and chemical-cleaning networks?

Yes. Piping for brine and chemical cleaning is among TMI applications for seawater desalination.

Desalination installation with GRP composite networks
Seawater desalination

Do you have an intake, brine or filtration network to engineer?

Send us available drawings, dimensions, flow rates and data for the different circuits. TMI can prepare the appropriate solution with you.