Industrial installation with TMI composite piping

GRP solutions for water treatment

TMI works on wastewater treatment installations with composite solutions for collection, transport, structure protection and settling areas.

GRP networks in a water-treatment plant
Wastewater · Collection · Treatment
Industry sector

Equipment permanently exposed to water and effluents

Wastewater treatment installations include collection networks, basins, clarifiers and tanks that must remain functional in a humid environment and under the characteristics of the treated effluents.

TMI designs and manufactures GRP/FRP composite solutions for wastewater treatment, including covers for clarifiers and treatment basins, wastewater transport and collection piping as well as protective linings for tanks and treatment structures.

These solutions extend TMI composite-material expertise from engineering and fabrication through installation or adaptation work on site.

Wastewater collection Clarifiers Treatment basins GRP lining On-site works
Applications TMI

Major requirements around treatment structures

Solution selection depends on the function and geometry of the structure, its connections and, for existing equipment, the condition of the installation.

01

Wastewater transport

Pipes and fittings used to transfer effluents between different areas or treatment stages.

02

Collection

Networks designed to collect and transfer wastewater to the treatment structures provided in the installation.

03

Clarifiers & basins

Covers and associated components for settling areas or treatment basins according to project configuration.

04

Tank protection

Lining treatment tanks where the structure requires surface protection or restoration.

Settling & treatment structures

Integrate composite equipment with basins and clarifiers

Settling areas bring together multiple interfaces: basins, piping, structures, technical access and systems associated with operation of the structure.

TMI includes covers for wastewater clarifiers and treatment basins among its applications in this sector. Equipment geometry and interfaces must be defined according to the relevant structure.

For an existing site, measurements and connection analysis help prepare fabrication and installation more precisely.

View engineering & design →
Clarifier and overflow weir in a water-treatment plant
Basins & treatment structures Interfaces to be prepared consistently with the basin, access points and connected networks.
Composite solutions

Networks and structures connected within one installation

TMI solutions for this sector mainly cover wastewater transport and collection as well as protection of treatment structures.

01

Pipes & fittings PRV

Components for wastewater transport and collection piping according to project dimensions and connections.

02

Clarifier covers

Equipment adapted to the structure geometry where a cover is included in the installation scope.

03

Treatment basins

Composite solutions associated with treatment structures according to project requirements and interfaces.

04

Tank lining

Protection of treatment-tank surfaces where substrate condition and service conditions require a lining solution.

Water-treatment equipment and GRP composite networks
Engineering, fabrication & site

Prepare each interface before implementation

In a treatment plant, piping, basins and equipment are closely interdependent. Dimensions and connections must therefore remain consistent from engineering through installation.

Measurements & drawingsIdentify required dimensions, levels, access points and connections before fabrication.
FabricationPrepare composite piping or equipment according to approved project data.
LiningTreat tank surfaces where this protection is part of the identified requirement.
InstallationMaintain continuity between fabricated equipment and its integration into an existing or new structure.
Structure lining

Protect or restore treatment-tank surfaces

Treatment-tank lining is one of TMI applications for wastewater installations.

For an existing structure, the solution must consider actual substrate condition, areas to be treated and the reported service conditions.

TMI can therefore combine GRP lining with engineering, preparation and on-site work where required by the project scope.

View GRP surface lining →
GRP lining d'un ouvrage industriel de traitement
Surface protection An intervention to be defined according to the structure, existing substrate and actual operating conditions.
Frequently asked questions

Water treatment: define the technical requirement

Drawings, dimensions, photos and information about the relevant structures help define the solution more precisely.

What solutions does TMI provide for wastewater treatment?

TMI designs and manufactures GRP/FRP composite solutions for wastewater treatment installations, including transport and collection piping, covers for clarifiers and treatment basins, and protective linings for tanks and treatment structures.

Does TMI manufacture wastewater collection piping?

Yes. Wastewater transport and collection piping is one of TMI applications in this sector.

Can you work on an existing treatment tank?

Treatment-tank lining is one of TMI applications. For an existing structure, substrate condition and actual service conditions must be assessed before defining the solution.

Can TMI provide engineering, fabrication and installation?

Yes. Depending on project scope, TMI can maintain continuity between engineering and design, workshop fabrication, on-site works and maintenance.

GRP network in a water-treatment installation
Water treatment

Do you have a piping network, clarifier or treatment tank to engineer?

Send us available drawings, dimensions, photos and information about the structure. TMI can prepare the appropriate solution with you.