Define the requirement
Clarify the required function, available data, industrial context and main project constraints.
The TMI engineering office turns requirements, site measurements and constraints into a technical definition that can be used for fabrication, installation and project follow-up.
A relevant engineering study starts with understanding the actual need: equipment function, fluid, environment, layout, interfaces and operating constraints.
TMI engineers and technicians support the customer in preparing the project, from site measurements and analysis of available data through costing and preparation of the drawings required for fabrication.
This stage reduces uncertainty in the workshop and on site while maintaining technical continuity between engineering, production and implementation.
The engineering process advances the project step by step, using increasingly precise data until it is ready for execution.
Clarify the required function, available data, industrial context and main project constraints.
Take the required measurements, analyze interfaces and establish the dimensions needed to define the solution.
Prepare costing, drawings and technical documents so the solution can be approved before production.
Finalize the agreed technical elements, integrate the execution lead time and prepare the file for fabrication.
Effective industrial design goes beyond equipment geometry. It must remain compatible with fabrication resources, shipping conditions and the actual site environment.
For piping, tanks, special parts, supports or fabricated equipment, TMI considers connections, access, overall dimensions and interfaces that may affect subsequent project stages.
The goal is to provide a sufficiently clear technical file to facilitate production decisions and limit late adaptations during installation.
Discover fabrication & production →
TMI uses different design and preparation software to adapt technical documents to the nature of each project.
Drafting, layout and representation of equipment, piping networks and technical interfaces.
3D modelling of parts and assemblies when the project requires detailed geometric definition.
Additional tools used to prepare piping-related work, calculations and layout.
Preparation and optimization of selected fabrication operations using engineering-approved data.
An integrated organization keeps the same technical data consistent from one stage to the next: engineering, fabrication, shipping and on-site works.
The more precise the initial information, the faster the study can progress toward an implementable solution.
The engineering office supports the project from requirements definition and site measurements through sizing, costing, drawing preparation and release to fabrication.
Yes. Existing drawings, surveys, diagrams, dimensions and available data can be used as a basis, subject to verification against the actual project requirements.
The TMI engineering office uses tools including AutoCAD 3D, SolidWorks, Infotrace, Piping CAD and Profirst.
Yes. Where required, layout, access, interfaces and site constraints are considered so the solution is better aligned with final implementation.
Send us your available data, dimensions, drawings and main constraints. The TMI engineering office can prepare the next project stages with you.