Fabrication industrielle TMI en atelier

Custom industrial fabrication & production

TMI turns approved engineering studies and drawings into equipment for industrial installations: GRP/FRP solutions, special parts, and metal or plastic fabricated equipment.

Fabrication of a special composite part in the TMI workshop
Production · TMI workshop
TMI production

Fabricate in line with the drawings, material and final use

Good industrial fabrication starts with clear data: dimensions, geometry, material, connections, interfaces and service conditions.

The TMI production team manufactures custom piping, equipment and components based on engineering-approved data. The objective is to maintain technical continuity between the engineering file and the equipment actually produced.

Production notably covers PRV / GRP, special parts, tanks and vessels, as well as metal and plastic fabrication.

PRV / GRP Piping Tanks & vessels Special parts Industrial fabrication
Fabrication process

From approved technical file to equipment ready to leave the workshop

Production is organized to maintain control of dimensions, interfaces and required operations through preparation of the finished equipment.

01

Workshop preparation

Review drawings, verify required dimensions, identify interfaces and organize fabrication operations.

02

Forming & fabrication

Transform the material according to the product family—composite, plastic or metal—and the defined geometry.

03

Assembly & finishing

Produce the connections, reinforcements, subassemblies and finishes required for equipment use.

04

Delivery preparation

Check the equipment, prepare packaging and organize the next stage: transport, export or site delivery.

GRP / FRP composite materials

Production dedicated to industrial composite equipment

A core part of TMI expertise is the manufacture of piping and equipment from resin- and glass-fibre-reinforced composite materials.

This expertise supports the production of multiple equipment families: pipes and fittings, tanks, vessels, flanges, grating, hatches, strainers, injectors and other special parts for industrial installations.

Geometry, dimensions and connections are tailored to the project rather than forcing a standard product where the installation requires custom fabrication.

Discover GRP / FRP solutions →
Special composite part manufactured in the TMI workshop
Custom fabrication Dimensions, connections and part geometry defined according to the industrial project.
Production capabilities

Several fabrication capabilities within one organization

The diversity of TMI projects requires different materials and fabrication methods depending on equipment function.

01

Piping & fittings

Fabrication of pipes, elbows, fittings, flanges and components for industrial networks.

02

Tanks & equipment

Custom tanks and equipment with connections, reinforcements and interfaces adapted to the project.

03

Special parts

Design and fabrication of specific components where function or geometry goes beyond standard solutions.

04

Multi-material industrial fabrication

Metal and plastic fabrication to complement the manufacturing requirements of industrial installations.

Industrial fabrication et production industrielle TMI
Fabrication rigor

Prepare consistent equipment before it leaves for site

Beyond material processing, production must ensure that dimensions and interfaces remain consistent with the project technical file.

Drawings & identificationFabrication based on approved data to limit discrepancies between engineering and workshop execution.
Dimensions & interfacesAttention to connections, openings, supports and equipment integration points.
FinishingSurface preparation and finishes adapted to the product and fabrication scope.
Site preparationAnticipation of transport, handling and installation operations when required by the project.
Production & implementation

Fabrication designed for practical site implementation

Large dimensions, site access, installation sequences and transport constraints can affect how equipment must be fabricated or prepared.

When required by the project scope, TMI prepares fabrication with future installation in mind: subassemblies, connections, handling and packaging are organized to remain consistent with the final installation.

Next step: on-site works →
Preparation of TMI equipment for transport and installation
From workshop to site Fabrication anticipates transport, handling and integration of the equipment at its final site.
Frequently asked questions

TMI fabrication: useful information before production starts

Drawings, dimensions, materials, quantities and operating constraints help prepare production more efficiently.

What types of equipment does TMI manufacture?

TMI manufactures GRP/FRP piping and fittings, tanks and vessels, flanges, grating, hatches, special parts and various metal or plastic fabricated equipment.

Does TMI production cover only composites?

No. Composite materials are a major part of TMI expertise, but the company also carries out metal and plastic fabrication depending on the project.

Can you manufacture from our drawings?

Yes. Fabrication can be carried out from approved drawings, dimensions and specifications. The engineering office can also complete the technical file where required before production starts.

Does fabrication take transport and installation into account?

Yes, when required. Dimensions, interfaces, subassemblies and handling conditions can be anticipated to facilitate shipping and on-site installation.

Production industrielle TMI avant livraison et installation
Equipment to manufacture

Do you have a drawing, part or piece of equipment to manufacture?

Send us your drawings, dimensions, materials and constraints. TMI can review the fabrication and prepare continuity through delivery or site installation.