Industrial installation with TMI GRP composite piping

GRP solutions for the chlorine industry

TMI designs and manufactures composite piping and tanks for transporting and storing corrosive fluids used in the chlorine industry.

GRP industrial network for transporting corrosive fluids
Chlorine · Caustic soda · Hypochlorite · Brine
Industry sector

Equipment designed around the fluid to be transported or stored

The chlorine industry uses several fluids requiring particular attention to material selection, connections and service conditions.

TMI designs and manufactures piping and tanks for caustic soda, sodium hypochlorite, brine and chlorine at 50°, drawing on its expertise in GRP/FRP composite materials.

This expertise is part of an integrated approach ranging from engineering and design through equipment fabrication and on-site installation, according to the specific requirements of each installation.

Caustic soda Sodium hypochlorite Brine Chlorine at 50° Piping & tanks
Applications TMI

Four fluids for composite piping and equipment

For each application, sizing, connections and the composite system must be defined from actual project data.

01

Caustic soda

Piping and tanks for transporting or storing caustic soda according to installation service conditions.

02

Sodium hypochlorite

Composite equipment for circuits and storage structures associated with sodium hypochlorite.

03

Brine

Piping networks and tanks integrated into installations where brine forms part of the process or preparation circuits.

04

Chlorine at 50°

GRP/FRP composite piping and tanks designed for installations using chlorine at 50°, according to service conditions and project-specific constraints.

Fluid transport

Design the network as a complete system

An industrial piping network is more than the main pipe. Elbows, flanges, fittings, supports and equipment interfaces must be prepared together.

TMI can combine its GRP / FRP pipes and fittings with project-specific parts, with particular attention to direction changes, connections and layout constraints.

For an existing installation, site measurements allow dimensions and interfaces to be prepared more accurately before fabrication starts.

Voir les tubes & accessoires PRV →
GRP piping with industrial flanges and connections
Composite networks Pipes, elbows, flanges and interfaces prepared consistently with the process and installation.
Storage

Tanks adapted to project connections and constraints

TMI designs and manufactures GRP/FRP composite tanks suited to storing fluids used in the chlorine industry, with dimensions, connections and interfaces defined according to each installation’s specific constraints.

01

Dimensions

Volume and geometry prepared according to stated requirements and available site space.

02

Connections

Nozzles, flanges and connections defined to integrate the tank into process networks.

03

Interfaces

Consideration of access, supports and neighboring equipment during project preparation.

04

Fabrication sur mesure

Workshop fabrication based on approved technical data before transport and installation.

GRP composite industrial tank manufactured for a corrosive environment
From engineering to site

Maintain technical consistency through final installation

In corrosive environments, material selection is important, but interface and installation quality are equally critical.

Engineering & designDefine dimensions, geometry, connections and interfaces from project requirements.
FabricationManufacture piping, tanks and associated parts according to approved data.
Transport & handlingPrepare equipment for transport and installation at the final site.
Montage sur siteConnect and integrate fabricated elements into the industrial installation.
Protection & maintenance

Work on existing installations as well

An existing installation may require a network modification, repair, component replacement or additional surface protection.

TMI also provides GRP lining, maintenance and on-site services. These capabilities can complement new fabrication when the project concerns an installation already in operation.

Structure condition, existing material, fluid and operating conditions must be analyzed before defining the intervention scope.

View maintenance & welding →
GRP lining applied to an industrial structure
Intervention on existing equipment Repair, adaptation or protection to be defined according to actual installation condition.
Frequently asked questions

Chlorine industry: define the technical requirement

Fluid, dimensions, service conditions and interfaces are required to prepare the project correctly.

What applications does TMI cover in the chlorine industry?

TMI designs and manufactures GRP/FRP composite piping and tanks for caustic soda, sodium hypochlorite, brine and chlorine at 50°, according to the characteristics and service conditions of each installation.

Does TMI manufacture tanks for sodium hypochlorite?

Yes. TMI manufactures tanks and piping networks for sodium hypochlorite, adapting design, connections and materials to project-specific requirements.

Can you manufacture piping networks for brine and caustic soda?

Yes. TMI designs and manufactures GRP/FRP piping networks for brine and caustic soda, with equipment and connections defined according to operating conditions and installation constraints.

Can TMI provide engineering, fabrication and installation?

Yes. Depending on project scope, TMI can maintain continuity between engineering and design, workshop fabrication and on-site installation.

Installation industrielle TMI pour transport de fluides corrosifs
Chlorine industry

Do you have a piping network or tank for a corrosive fluid to engineer?

Send us the fluid information, dimensions, service conditions and available drawings. TMI can prepare the appropriate solution with you.