TMI industrial piping and installation

Custom industrial pipe supports

TMI manufactures the support components required for industrial piping integration: primary supports, secondary structures and pipe racks for multiple lines.

Industrial piping support systems

A properly supported network starts with a clear understanding of the layout

A pipe support is not simply an accessory added after installation. It contributes to network organization, line restraint and integration into the installation structure.

TMI distinguishes three complementary families: primary supports, directly associated with pipes or valves; secondary supports, which carry these primary supports; and racks designed to organize several piping lines.

Depending on the project specification, supports can receive a specified paint system or hot-dip galvanization.

Network integration

Supports must be specified together with the piping, not independently

Routing geometry, equipment positions, accessibility, existing structures and site constraints directly influence support shape and positioning.

To prepare a coherent solution, TMI can work from piping drawings, layout drawings and available site data. Loads, possible movements and specific requirements must be validated as part of the project engineering study.

  • Pipe clamps and restraint points
  • Supports dedicated to valves and associated equipment
  • Secondary structures to carry primary supports
  • Racks for multiple piping lines
  • Painted or hot-dip galvanized finish according to specification
Tuyauteries et structures de support sur une installation industrielle
A complete-system approachSupport systems are prepared in line with routing, equipment and the actual organization of the installation.
Applications

Support solutions for different piping configurations

From supporting a single line to organizing a complete piping battery, the support system must remain consistent with the site configuration.

01

Piping lines

Clamps and primary supports for local pipe restraint along the routing.

02

Valves & equipment

Specific supports for network points where a valve or equipment item requires an adapted configuration.

03

Secondary structures

Metal structures creating the interface between primary supports and structures available in the installation.

04

Pipe racks

Structures organizing several parallel lines to facilitate layout, identification and integration within the industrial site.

Installation of piping and supports on an industrial site
From layout to installation

Prepare supports together with the network and site constraints

Support systems should be considered early enough to limit on-site adaptations and keep the installation clear and coherent.

01
Routing analysis

Review of piping, equipment and structures available on site.

02
Support definition

Identification of primary supports, secondary supports and racks required to organize the network.

03
Fabrication & finishing

Manufacture of the components followed by the specified finish: paint system or hot-dip galvanization.

04
On-site installation

Installation and coordination with piping works according to the scope entrusted to TMI.

Frequently asked questions

Pipe supports: key points to define before fabrication

Network routing, equipment and available structures help determine the appropriate support family and configuration.

Which pipe-support families does TMI manufacture?

TMI distinguishes primary supports, secondary supports and multi-line pipe racks. Primary supports include pipe clamps and valve supports.

What is the difference between a primary and secondary support?

The primary support is directly associated with the pipe or equipment. The secondary support is the structure that carries the primary support.

Does TMI manufacture racks for multiple piping lines?

Yes. Multi-line pipe racks are one of the three support families offered by TMI.

Which finishes are available?

Depending on the project specification, supports can be finished with a defined paint system or hot-dip galvanized.

What information should be provided for an engineering request?

Piping or layout drawings, line diameters, valve and equipment positions, available structures and known site constraints provide a useful basis for engineering.

Installation industrielle TMI
Your piping network

Do you need pipe supports or a pipe rack?

Send us your routing, main network dimensions and installation constraints. TMI can engineer a support solution suited to the project.